learn to make money free

paid surveys

Sunday, April 4, 2010

CCNA2 V4.0 Exploration - Chapter 3

Chapter 3 - Exam Answers



Which two statements correctly describe the concepts of administrative distance and metric? (Choose two.)
--> Administrative distance refers to the trustworthiness of a particular route.
--> Routes with the smallest metric to a destination indicate the best path.

2. Refer to the exhibit. Which statement correctly describes how R1 will determine the best path to R2?
--> R1 will install an EIGRP route using network B in its routing table because the administrative distance of EIGRP is lower than RIP.

3. Which two statements are true regarding classless routing protocols? (Choose two.)
--> sends subnet mask information in routing updates
--> allows for use of both 192.168.1.0/30 and 192.168.1.16/28 subnets in the same topology

4. Which command would the network administrator issue to determine if load balancing is in effect on a router?
--> show ip route

5. Which statement is true regarding routing protocols?
--> EIGRP uses DUAL to calculate the shortest path and can be configured to do unequal cost load balancing.

6. Which two conditions would create a setting where the use of a distance-vector routing protocol would be efficient? (Choose two.)
--> the network is using a hub and spoke topology
--> the network is using a flat design

7. What is the purpose of a routing protocol?
---> It allows a router to share information about known networks with other routers.

8. Which of the following best describes the operation of distance vector routing protocols?
--> hey send their routing tables to directly connected neighbors.

9. Which of the following is associated with link-state routing protocols?
--> shortest-path first calculations

10. Why is fast convergence desirable in networks that use dynamic routing protocols?
--> Routers may make incorrect forwarding decisions until the network has converged.

11. Which of the following conditions must be met in order for a network to have converged
--> The routers in the network are operating with consistent routing knowledge.

12. Which two statements are true regarding metrics? (Choose two.)
--> EIGRP uses bandwidth as a metric.
--> OSPF uses cost based on bandwidth as a metric.

13. Which two statements are true regarding the advantages of the use of static routes? (Choose two).
--> increased security
--> the administrator maintains control over routing

14. The following line of code is displayed in a routing table:
R 209.165.201.0/24 [120/2] via 192.168.252.2, 00:00:16, S0/0/0
What can be concluded from this output?
--> The value, 120, is used to determine the best path when a router has more than one routing protocol configured for the same destination network.

15. What will be the result of the following commands?
ORL(config)# interface fastethernet 0/0
ORL(config-if)# ip address 172.16.3.1 255.255.255.0
ORL(config-if)# no shutdown
--> A routing table entry is made to the 172.16.3.0 network with a code of "C".

16. An engineer creates a static route by entering the Router(config)# ip route 10.0.0.0 255.255.255.0 192.168.1.2 command. What can be concluded about this route?
--> The administrative distance of this route is 1.

17. Refer to the exhibit. Router1 and Router2 are running EIGRP. All interfaces are operational and packets can be forwarded between all networks. What information will be found in the routing table for Router1?
--> The administrative distance of the route to network 172.16.0.0 will be 90.

18. The following line of code is present in the routing table:
O 10.16.1.0/27 [110/129] via 192.168.1.5, 00:00:05, Serial0/0/1
What does the number 129 indicate in this output?
--> The cost for this link has a value of 129.

19. A growing medium-sized manufacturing company recently began to have routing instability issues. The company uses static routes and has a mixture of over 30 Cisco and non-Cisco routers. The network administrator has decided to convert the network to dynamic routing. What characteristics of protocols should be considered in this selection process?
--> OSPF can be used between the routers.

20. Refer to the exhibit. If RIP is the routing protocol, what is the value of the metric from router A to network 192.168.5.0/24?
--> 3

21. A router learns two paths with equal metrics to a destination network via the RIP routing protocol. How will the router handle packets to the destination network?

--> The router will install both routes in the routing table and load balance between the two.


22 When multiple routing protocols have a route to the same destination network, what determines which route is installed in the routing table?
best metric 
lowest hop count 
greatest available bandwidth 
-- > lowest administrative distance 
lowest cost



Saturday, April 3, 2010

CCNA2 V4.0 Exploration - Chapter 2

Chapter 2 - Exam Answers



Which of the following are displayed by the Router# show cdp neighbors command? (Choose three.)

--> platform
--> holdtime
--> local interface
 
 
 Why is it advisable to enter a next-hop IP address when creating a static route whose exit interface is an Ethernet network?

--> In a multi-access network, the router cannot determine the next-hop MAC address for the Ethernet frame without a next-hop address.
 

The output of the Router# show interfaces serial 0/1 command displays the following:
Serial0/1 is up, line protocol is down.
What is the most likely cause for the line protocol being down?

--> No clock rate has been set.

 

A static route that points to the next hop IP will have what administrative distance and metric in the routing table?

--> administrative distance of 1 and metric of 0

 

Refer to the exhibit. What two commands will change the next-hop address for the 10.0.0.0/8 network from 172.16.40.2 to 192.168.1.2? (Choose two.)

--> A(config)# no ip route 10.0.0.0 255.0.0.0 172.16.40.2
--> A(config)# ip route 10.0.0.0 255.0.0.0 192.168.1.2


 
Refer to the exhibit. A company network engineer is assigned to establish connectivity between the two Ethernet networks so that hosts on the 10.1.1.0/24 subnet can contact hosts on the 10.1.2.0/24 subnet. The engineer has been told to use only static routing for these company routers. Which set of commands will establish connectivity between the two Ethernet networks?

--> R1(config)# ip route 10.1.1.0 255.255.255.0 192.168.0.2R2(config)# ip route 10.1.2.0 255.255.255.0 192.168.0.1
 

Refer to the exhibit. Which static route should be configured on Router1 so that host A will be able to reach host B on the 172.16.0.0 network?
 
--> ip route 172.16.0.0 255.255.0.0 S0/0/0

 

 What address can be used to summarize networks 172.16.1.0/24, 172.16.2.0/24, 172.16.3.0/24, and 172.16.4.0/24?

--> 172.16.0.0/21

 
  
Refer to the exhibit. What is the significance of the /8 in the route to the 10.0.0.0 network?

--> It indicates the number of consecutive bits, from the left, in the destination IP address of a packet that must match 10.0.0.0 to use that route.
 

What two devices are responsible for converting the data from the WAN service provider into a form acceptable by the router? (Choose two).

--> a modem
--> a CSU/DSU device

 

A network administrator enters the following command into Router1: ip route 192.168.0.0 255.255.255.0 S0/1/0. Router1 then receives a packet that is destined for 192.168.0.22/24. After finding the recently configured static route in the routing table, what does Router1 do next to process the packet?

--> encapsulates the packet into a frame for the WAN link and forwards the packet out the S0/1/0 interface

 
  
Which piece of information is available from examining the output of the command show ip interface brief?

--> Interface IP address

 
  
Which of the following is true regarding CDP and the graphic shown?

--> By default, Router A will receive CDP advertisements from routers B and C.

 
 Which two statements describe functions or characteristics of CDP? (Choose two.)

--> It starts up automatically and allows the device to detect directly connected neighbor devices that use CDP.
--> It allows systems to learn about each other even if different network layer protocols are configured.

 

 Hosts on two separate subnets cannot communicate. The network administrator suspects a missing route in one of the routing tables. Which three commands can be used to help troubleshoot Layer 3 connectivity issues? (Choose three.)

--> ping
--> traceroute
--> show ip route

 
 What happens to a static route entry in a routing table when the outgoing interface is not available?

--> The route is removed from the table.

 
 The routers in the diagram use the subnet assignments shown. What is the most efficient route summary that can be configured on Router3 to advertise the internal networks to the cloud?

--> 192.1.1.0/25

 
Refer to the exhibit. How will packets destined to the 172.16.0.0 network be forwarded?

--> Router1 will perform recursive lookup and packet will exit S0/0.

 
 A router has one static route to each destination network. Which two scenarios would require an administrator to alter the static routes that are configured on that router? (Choose two.)

--> The destination network no longer exists.
--> A topology change occurs where the existing next-hop address or exit interface is not accessible.

 
 Refer to the exhibit. Given the output in the exhibit, how would a clock rate be determined for this link?

--> The rate configured on the DCE determines the clock rate.

 
 Refer to the exhibit. Which set of commands will configure static routes that will allow the WinterPark and the Altamonte routers to deliver packets from each LAN and direct all other traffic to the Internet?

--> WinterPark(config)# ip route 0.0.0.0 0.0.0.0 192.168.146.1
Altamonte(config)# ip route 10.0.234.0 255.255.255.0 192.168.146.2
Altamonte(config)# ip route 0.0.0.0 0.0.0.0 s0/1

 
 Refer to the exhibit. What two commands are required to provide connectivity between the 192.168.1.0 and 10.0.0.0 networks without requiring recursive lookup? (Choose two.)

--> A(config)# ip route 10.0.0.0 255.0.0.0 s 0/1/0
--> B(config)# ip route 192.168.1.0 255.255.255.0 s 0/0/0

Friday, April 2, 2010

CCNA2 V4.0 Exploration - Chapter 1

Chapter 1 - Exam Answers



If a router cannot find a valid configuration file during the startup sequence, what will occur?
--> The router will prompt the user for a response to enter setup mode.

Refer to the exhibit. The network administrator has configured the router with the interface IP addresses shown for the directly connected networks. Pings from the router to hosts on the connected networks or pings between router interfaces are not working. What is the most likely problem?
--> The interfaces must be enabled with the no shutdown command.

  Refer to the exhibit. What can be concluded from the routing table output in the exhibit? (Choose two.)
--> The FastEthernet0/0 and Serial0/0/0 interfaces of this router were configured with an IP address and the no shutdown command.
--> An IP packet received by this router with a destination address of 198.18.9.1 will be forwarded out of the Serial0/0/0 interface.

  Refer to the exhibit. The frame shown in the exhibit was received by the router. The router interfaces are operational. How will the router process this frame? (Choose two.)
--> The router will change the frame type to one supported by the WAN link before forwarding the frame.
--> The frame was received on the Fa0/0 interface of the router and will be switched to the S0/0/0 interface.

  Passwords can be used to restrict access to all or parts of the Cisco IOS. Select the modes and interfaces that can be protected with passwords. (Choose three.)
--> VTY interface
--> console interface
--> privileged EXEC mode

  Which two statements correctly describe the components of a router? (Choose two.)
--> ROM contains diagnostics executed on hardware modules.
--> Flash memory does not lose its contents during a reboot.

 Refer to the exhibit. After host 2 is connected to the switch on the LAN, host 2 is unable to communicate with host 1. What is the cause of this problem?
--> Host 1 and host 2 are on different networks.

8. Which are functions of a router? (Choose three.)
--> packet switching
--> segmentation of broadcast domains
--> selection of best path based on logical addressing

  Refer to the exhibit. All routers have a route in its routing table to each network that is shown in the exhibit. Default routes have not been issued on these routers. What can be concluded about how packets are forwarded in this network? (Choose two.)
--> If RouterA receives a packet that is destined for 192.168.3.146, it will be forwarded out interface S0/0/1.
--> If RouterB receives a packet that is destined for 10.5.27.15, it will be forwarded out interface S0/0/1.

  The serial connection shown in the graphic needs to be configured. Which configuration commands must be made on the Sydney router to establish connectivity with the Melbourne site? (Choose three.)
--> Sydney(config-if)# ip address 201.100.53.2 255.255.255.0
--> Sydney(config-if)# no shutdown
--> Sydney(config-if)# clock rate 56000

  Refer to the exhibit. What can be concluded from the output of the running-configuration of a router?
--> The commands that are displayed determine the current operation of the router.

  Refer to the exhibit. Host A pings host B. When R4 accepts the ping into the Ethernet interface, what two pieces of header information are included? (Choose two.)
--> destination IP address: 192.168.10.134
--> destination MAC address: 9999.DADC.1234

  What is the outcome of entering these commands?
R1(config)# line vty 0 4
R1(config-line)# password check123
R1(config-line)# login
--> sets the password to be used for connecting to this router via Telnet

 Which of the following is the correct flow of routines for a router startup?
--> load bootstrap, load IOS, apply configuration

 What three processes does a router execute when it receives a packet from one network that is destined for another network? (Choose three.)
--> decapsulates the Layer 3 packet by stripping off the Layer 2 frame header
--> uses the destination IP Address in the IP header to look up the next-hop address in the routing table
--> encapsulates the Layer 3 packet into the new Layer 2 frame and forwards it out the exit interface

  The network administrator needs to connect two routers directly via their FastEthernet ports. What cable should the network administrator use?
--> cross-over

 Which two statements describe characteristics of load balancing? (Choose two.)
--> Load balancing allows a router to forward packets over multiple paths to the same destination network.
--> Unequal cost load balancing is supported by EIGRP.

  What information about the router and its startup process can be gathered from the output of the show version command? (Choose three.)
--> the last restart method
--> the configuration register settings
--> the location from where the IOS loaded

  Which interfaces in the exhibit could be used for a leased line WAN connection? (Choose two.)
--> 1
--> 4

  From what location can a router load the Cisco IOS during the boot process? (Choose two.)
--> TFTP server
--> Flash memory

  A network administrator has just entered new configurations into Router1. Which command should be executed to save configuration changes to NVRAM?
--> Router1# copy running-config startup-config

  What is the default sequence for loading the configuration file?
--> NVRAM, TFTP, CONSOLE

 What header address information does a router change in the information it receives from an attached Ethernet interface before information is transmitted out another interface?
--> the Layer 2 source and destination address

Thursday, April 1, 2010

CCNA 1 -Final exam - UPDATE!

CCNA1 - Exploration - UPDATED (Correct Answers) :



Host A attempts to establish a TCP/IP session with host C...

Refer to the exhibit. Host A attempts to establish a TSP/IP session with host C. During this attempt, a frame was captured at the FastEthernet interface fa0/1 of router Y. The packet inside the captured frame has the IP source address 172.16.1.5 and the destination IP address is 172.16.7.24 . What is the source MAC address of the frame at the time of capture?

0040.8596.DE82

**0060.7320.B826

0060.7320.D632

0010.4F74.AC09

0040.8596.DE81

2.
Refer to the exhibit. An employee wants to access the organization intranet from home. Which intermediary device should be used to connect the organization intranet to the Internet to enable this access?
hub
switch
**router
wireless access point

3.
The host was disconnected from switch 2 and connected to switch 1. Which combination of IP address, subnet mask, and default gateway should be assigned to this host to allow it to function in the network?

Refer to the exhibit. The host was disconnected from switch 2 and connected to switch 1. Which combination of IP address, subnet mask, and default gateway should be assigned to this host to allow it to function in the network?

IP address: 10.10.9.37 Subnet mask: 255.255.255.240 Default gateway: 10.10.9.35
**IP address: 10.10.9.37 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35
IP address: 10.10.9.29 Subnet mask: 255.255.255.248 Default gateway: 10.10.9.35
IP address: 10.10.9.32 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35
IP address: 10.10.9.37 Subnet mask: 255.255.255.224 Default gateway: 196.1.105.6
IP address: 10.10.9.63 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35

4. Which range of port numbers is assigned dynamically to client applications when initiating a connection to the server?
0 to 255
**49152 to 65535
1024 to 49151
0 to 1023

5.
Refer to the exhibit. The diagram represents the process of sending e-mail between clients. Which list correctly identifies the component or protocol used at each numbered stage of the diagram?
1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA
1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA
1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA
**1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA

6. Refer to the exhibit. While configuring a network, a technician wired each end of a Category 5e cable as shown. Which two statements are true about this setup? (Choose two.)

**The cable is suitable for connecting a switch to a router Ethernet port.
**The cable is suitable for connecting dissimilar types of devices.
The cable is unusable and must be rewired.
The cable is terminated in a way that the transmit pin is wired to the receive pin.
The cable simulates a point-to-point WAN link.

7. Refer to the exhibit. Which two facts can be determined about the topology? (Choose two.)

**Four collision domains are present.
One logical network is represented.
**Two broadcast domains are present.
Three networks are needed.
Three logical address ranges are required.

8.
nslookup command on the PC

Refer to exhibit. A technician uses the nslookup command on the PC and views the output that is displayed in the exhibit. What is the IP address of the primary domain name server used by the host?

**10.10.10.32
192.168.1.5
192.168.1.99
192.168.2.100

9. Which subnet mask will allow 2040 hosts per subnet on the IP network 10.0.0.0?
255.255.0.0
255.255.254.0
255.255.252.0
**255.255.248.0
255.255.240.0
255.255.255.128

10. Which three addresses belong to the category of private IP addresses? (Choose three.)
**10.0.0.1
127.0.0.1
150.0.0.1
**172.16.0.1
**192.168.0.1
200.100.50.1

11.
Host A is transmitting data to host B. Which address combination will be used as the data leaves the Router1 Fa0/1 interface?

Refer to the exhibit. Host A is transmitting data to host B. Which address combination will be used as the data leaves the Router1 Fa0/1 interface?
Destination IP: 192.168.72.2 Source MAC: 0007.C2B4.3421
**Destination IP: 192.168.10.4 Source MAC: 0030.8596.DE81
Destination IP: 192.168.10.4 Source MAC: 0007.C2B4.3421
Destination IP: 192.168.72.2 Source MAC: 0030.8596.DE81

12. Which memory contents will change as a result of using the Router# erase startup-config command on a router?
RAM
ROM
flash
**NVRAM

13. What are two characteristics of the data link layer? (Choose two.)
**It segments and reorders the data.
It exchanges the frames between nodes.
**It defines the method by which network devices place data onto the media.
It manages the transfer of data between the processes that run on each host.
It retrieves signals from the media and restores them to their bit representations.

14. Refer to the exhibit. The NAT functionality of the router is enabled to provide the PC with Internet access. Which IP address can be assigned to router interface Fa0/0?
10.0.0.1
172.16.1.1
**209.165.201.1
192.168.1.1

15.
A user wants to access the Internet from the PC. A part of the running configuration of the router is shown

Refer to the exhibit. A user wants to access the Internet from the PC. A part of the running configuration of the router is shown. Which default gateway IP address should be configured at the PC to enable this access?
10.1.192.2
10.1.192.54
**10.1.192.1
192.31.7.1

16. Refer to the exhibit. A network technician wants to connect host A to the console of a Cisco switch to initialize the configuration. What type of cable is required for this connection?
straight-through cable
crossover cable
**rollover cable
serial cable

17. A network administrator wants to restrict access to the router privileged EXEC mode. Which password should the administrator use?
**enable
aux
console
VTY

18. What are three characteristics of CSMA/CD? (Choose three.)
**Devices listen to the media and transmit data only when they cannot detect another signal on the media.
**All devices on the media can hear all communications.
Devices communicate based on a configured priority.
After a collision occurs, the devices that caused the collision have first priority when attempting to retransmit.
**When a collision occurs, all devices stop transmitting for a randomly generated period of time.
CSMA/CD uses a token system to avoid collisions.

19. Refer to the exhibit. The router of the company failed and was replaced. After the replacement, hosts C and D in the Education office are able to ping each other, but they are unable to access the hosts in the Accounts office. What is the likely cause of the problem?
The IP address at the fa0/0 interface of the router is incorrectly configured.
**The subnet mask at the fa0/1 interface of the router is incorrectly entered.
The IP address at the serial interface of the router is incorrectly configured.
The hosts in the Accounts office are not on the same subnet as the hosts in the Education office.

20. Refer to the exhibit. Host A and B are unable to communicate with each other. What is the reason for this?
Host A is assigned a network address.
Host B is assigned a multicast address.
Host A and host B belong to different networks.
**The gateway addresses are network addresses.

21. Refer to the exhibit. A user wants to view the current configuration. The output of the ipconfig/all command is displayed in the exhibit. What three facts can be determined from the output? (Choose three.)
The IP address is obtained from the DHCP server.
**This PC cannot communicate with other networks.
**The network can have 14 hosts.
The prefix of the computer address is /25.
The IP address is routable on the Internet.
**The assigned address is a private address.

22. Which two types of media can provide bandwidth up to 1 Gb/s? (Choose two.)

10 BASE-T
100 BASE-T
100 BASE-FX
**1000 BASE-TX
**1000 BASE-SX

23. Refer to the exhibit. RouterB is configured properly.
The Ethernet interface Fa0/0 of RouterA is configured with the use of the commands that are shown However, a ping from the Fa0/0 interface of RouterA to the Fa0/0 interface of RouterB is unsuccessful. What action should be taken on RouterA to solve this problem?
Use the description command on the FastEthernet interface Fa0/0.
Configure the clock rate of the FastEthernet interface Fa0/0.
**Use the no shutdown command on the FastEthernet interface Fa0/0.
Reboot the router.

24. Refer to the exhibit. Host A wants to connect to host B on a different network. Which three IP addresses can be assigned to host A to enable this connectivity? (Choose three.)

172.16.11.36
172.16.11.95
**172.16.11.88
**172.16.11.70
172.16.11.64
**172.16.11.67

25. Refer to the exhibit. Host A wants to access e-mail. Which destination socket number will be used to communicate this request?
10.10.1.2:53
0007.A7B8.0008:25
10.10.1.3:23
**10.10.1.3:25

26. A network administrator uses the copy startup-config running-config command on a router to make configuration changes. Which component is affected by this command?
ROM
**NVRAM
RAM
flash

27. Refer to the exhibit. In a network, Hosts A and B are exchanging segments at the transport layer. Which two statements are true about this exchange? (Choose two.)

Host A is transferring files to host B using FTP.
**Host A will send the next segment containing data for this session starting with byte number 11
The segment from the destination host indicates that 11 bytes have been received successfully
**Host A is initiating a Telnet session to host B
Host B can send the next segment of the data starting with byte number 2

28. How does the transport layer allow a host to maintain multiple, simultaneous communication streams across different applications?
It uses error control mechanisms.
**It uses a connectionless protocol only for multiple simultaneous transmissions.
It uses multiple Layer 2 source addresses.
It uses multiple ports.

29. What information is contained in the header of Layer 3 to help data delivery?
port number
device physical address
**destination host logical address
virtual connection identifier

30. Refer to the exhibit. The tracert command used from host X to host Y was successful. What is the correct sequence of intermediary network devices that will be present in the trace list?
switch A, switch D, switch G, host Y
**router B, router E, router F, host Y
switch A, router B, switch D, router E, router F, switch G, host Y
switch A, router B, router F, switch G, host Y

31. While configuring a router, a network technician wants to name the router. Which prompt should the technician see when entering the hostname command?
Router>
Router#
**Router(config)#
Router(config-line)#

32. An organization has decided to use IP addresses in the range 172.20.128.0 to 172.20.143.255. Which combination of network ID and subnet mask identifies all IP addresses in this range?
Network ID: 172.20.128.0 Subnet mask: 255.255.255.0
Network ID: 172.20.128.0 Subnet mask: 255.255.0.0
Network ID: 172.20.128.0 Subnet mask: 255.255.224.0
**Network ID: 172.20.128.0 Subnet mask: 255.255.240.0
Network ID: 172.20.128.0 Subnet mask: 255.255.255.240
33. Refer to the exhibit. Which logical topology describes the exhibited network?
star
**ring
point-to-point
multi-access
34. Refer to the exhibit. All devices in the network use default configurations. How many broadcast domains are there in this topology?

3
**5
7
9
11

35. Which three IPv4 addresses represent valid network addresses for a subnet? (Choose three.)
192.168.9.64/28
**192.168.9.146/28
192.168.9.96/28
**192.168.9.129/26
**192.168.9.51/26
192.168.9.64/26

36. Two routers are connected via their serial ports in a lab environment. The routers are configured with valid IP addresses, but they cannot ping each other. The show interface serial0/0 command shows that the serial0/0 interface is up but the line protocol is down. What could be the cause of this problem?
The no shutdown command has not been applied to the interfaces.
**The clock rate command has not been entered on the DCE interface.
The interface timers are not cleared.
The FastEthernet interface is emulating a serial interface by assigning it a timing signal.

37. Which device should be used for enabling a host to communicate with another host on a different network?
switch
hub
**router
host

38. Refer to the exhibit. The network administrator uses the netstat command to display the open, active, and running TCP connections on a networked host. The exhibit displays the output of this command. Which two facts can be determined from this output for accessing www.cisco.com? (Choose two.)

**The source port indicates that the session is an http session.
The connection is not successful.
**The source port of the host is 3166.
The destination port is 80.
The source port does not support communication with the destination port that is listed.
The source port indicates that a UDP session has been initiated.

39. Which OSI layer uses the header information to reassemble the data segments into streams?

application layer
network layer
presentation layer
session layer
**transport layer

40. Which three statements are true about transport layer protocols? (Choose three.)
The UDP transport layer protocol provides for low overhead data delivery.
**The TCP transport layer protocol uses windowing and acknowledgments for reliable transfer of data.
**The TCP and UDP port numbers are used by application layer protocols.
**The TCP transport layer protocol provides services to direct the data packets to their destination hosts.
The UDP transport layer protocol is a connection-oriented protocol.
The UDP transport layer protocol keeps track of all the data segments in each conversation.

41. To enhance security in a network, the network administrator uses these commands:

Router(config)# line console 0
Router(config-line)# password j1mdi2
Router(config-line)# login
What two conclusions are evident from these commands? (Choose two.)
**Users who attempt to connect to the console port of the router must enter a password.
**The entries permit access through the console by the use of j1mdi2 as the password.
The entries eliminate the need for authentication.
Access through the console will be denied because the console configuration is incomplete.
The entries prevent passwords from being displayed as plain text.

42. Refer to the exhibit. Each media link is labeled. What type of cable should be used to connect the different devices?
Connection 1 - straight-through cable Connection 2 - straight-through cable Connection 3 - crossover cable
Connection 1 - straight-through cable Connection 2 - crossover cable Connection 3 - rollover cable
Connection 1 - crossover cable Connection 2 - rollover cable Connection 3 - straight-through cable
**Connection 1 - crossover cable Connection 2 - straight-through cable Connection 3 - crossover cable
Connection 1 - straight-through cable Connection 2 - rollover cable Connection 3 - crossover cable

43. Refer to the exhibit. The headers added at each layer are shown.
Which layer adds the destination and source process numbers to ensure that data is delivered to the correct application?
physical layer
data link layer
network layer
**transport layer

44. Which three statements are true about network layer addressing? (Choose three.)
It uses the last octet of the IP address to identify the network.
**It supports data communications between networks.
**It is configured by the network technician.
It is a 16-bit IPv4 address.
It prevents broadcasts.
**It uniquely identifies each host.

45. Refer to the exhibit. A PC is connected to a network. Which action will verify that the PC can communicate with its default gateway?
Use the ping 127.0.0.1 command.
Use the ipconfig command.
Use the ipconfig/all command.
**Use the ping 10.0.0.254 command.

46. Refer to the exhibit. Host A sends a frame with the destination MAC address as FFFF.FFFF.FFFF. What action will the switch take for this frame?
It will drop the frame.
It will send the frame back to host A.
**It will send the frame to all hosts except host A.
It will forward the frame to the default gateway.

47. Refer to the exhibit. The network administrator remotely accesses the CLI of RouterB from PC1 using a secure connection. Which statement is true about this connection?
The Telnet server process is running on PC1.
Only the exchange of the Telnet username and password is encrypted.
The GET request is sent to RouterA to retrieve data.
**The SSH service is used to connect PC1 to RouterB.

48. Which OSI layer uses the header information to reassemble the data segments into streams?
application layer
network layer
presentation layer
session layer
**transport layer

49. Refer to the exhibit. A router, the table of which is shown, receives a packet that is destined for 192.168.9.4. How will the router treat the packet?
It will drop the packet.
It will forward the packet via FastEthernet 0/1.
**It will forward the packet to the next hop address.
It will forward the packet to 172.16.2.0

50. Refer to the exhibit. Cable 1 and Cable 2 are wired for specific physical layer requirements. The table lists each segment by number and the cable that connects the network components on that segment. Which three segments have the correct cables installed? (Choose three.)

**segment 1
segment 2
segment 3
**segment 4
**segment 5
segment 6